Цилиндърът, соленоидният клапан и неговите фитинги са най -основните три компонента в областта на пневматичното .
Двойно действащ цилиндър, е необходимостта да се избере два петпосочен солен клапан ., свързващ тези компоненти, трябва да се използват пневматични фуги, PU тръби (специфичен тип какво да изберете ..
The solenoid valve has five threaded holes, three on one side and two on the other.The larger one in the middle of the side of the three holes is the air inlet, which is connected to the triplet (note that the triplet is directional) and the two next to it are the exhaust holes. The exhaust holes only need to be equipped with silencers.
The other side of the two holes, is the work hole, the two holes are connected with the cylinder before and after the end cover on the two holes, so basically assembled.Maintain the following airflow, the pressure regulating valve is generally adjusted 4-5Mpa pressure can be energized by the solenoid valve, power off, to control the reciprocating motion of the cylinder бутало .
